CBPZV - EXPO DRY ERASE MARKERS CHISEL TIP, BLACK
- MSDS: CBPZV
- Manufacturer: SANFORD CORP
- Product Name: EXPO DRY ERASE MARKERS CHISEL TIP, BLACK
- National Stock Number: 7510-00N072178
Product Identification
Product ID:EXPO DRY ERASE MARKERS CHISEL TIP, BLACK
MSDS Date:12/20/1994
FSC:7510
NIIN:00N072178
MSDS Number: CBPZV
Responsible Party
BELLWOOD, IL 60104
US
Emergency Phone: 800-228-5635
Info Phone: 800-228-5635
Cage: 86874
Contractor
Telephone: 1-800-323-0749
Cage: 86874
Ingredients
PIGMENTS
OSHA PEL N/K
ACGIH TLV: N/K
RESIN; (RESINS)
OSHA PEL N/K
ACGIH TLV: N/K
2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE) (HEXONE)
CAS: 108-10-1
RTECS: SA9275000
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
16 @ 20C; VAP
RTECS: 9999999ZZ
60F,
RTECS: 9999999ZZ
ACETIC ACID, BUTYL ESTER; (N-BUTYL ACETATE) (CERCLA)
CAS: 123-86-4
RTECS: AF7350000
OSHA PEL 150 PPM
ACGIH TLV: 150 PPM/200STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16, PART
1500. THE PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE
CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .
Fire Fighting
Flash Point Method:TCC
Flash Point:60.0F,15.6C
Lower Limits:SEE ING 3
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL AND DISCARD AS
SOLID WASTE.
Handling
Handling and Storage Precautions:DO NOT SHAKE MARKER. KEEP CAP ON
MARKER WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE UNDER NORMAL USE CONDITIONS.
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:SEE ING 3
Vapor Pres:SEE ING 3
Vapor Density:SEE ING 3
Spec Gravity:SEE ING 3
Evaporation Rate & Reference:SEE INGREDIENT 3
Appearance and Odor:SEE INGREDIENT 3
Stability
Stability Indicator/Materials to Avoid:YES
NOT AVAILABLE.
Stability Condition to Avoid:NOT AVAILABLE.
Hazardous Decomposition Products:NOT AVAILABLE.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . DISCARD AS SOLID WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.